A Full-Scale Guide to Fix Netgear Router IP Not Working Issue

Whether you want to change the default password of your Netgear wireless router, update its firmware, or do pretty much anything else, you need to perform Netgear router login via What happened? Are you not able to log in to your home router using the default IP address? Well, that doesn’t sound good. But, worry not. Simply follow the troubleshooting hacks mentioned in this post and learn how to get rid of the IP not working issue in a jiffy.

However, before you learn how to resolve the issue at hand, get familiar with the factors that might have led you to it.

Why is Netgear Router IP Not Working?

Here are some of the most common reasons behind the IP not working issue:

  • You might have typed in the address bar of your internet browser instead of
  • The firmware of your Netgear wireless router is either corrupted or outdated.
  • The signals of your router or modem are getting blocked due to transmitting appliances, electronic devices, metal objects, and reflexive surfaces.
  • The internet browser that you are using is not running on an updated version.
  • The distance between your Netgear Nighthawk router and the existing modem is too much. Also, the connection between them is not secure.
  • Your Internet Service Provider is not doing his job properly.

Now that you are well aware of the reasons forcing you to face the Netgear router IP not working issue, follow the tips mentioned below to get rid of it.

Fixed: Netgear Router IP Not Working

Reboot Your Netgear Router

We did not mention this earlier but, technical glitches can also compel you to experience the Netgear router IP not working issue. To bid adieu to these glitches, you need to reboot your wireless device. Here is how you can do that:

  • Power off your Netgear wireless router and unplug it from its electrical outlet.
  • Wait for a few seconds.
  • Then, plug your Netgear router back into its wall socket and power it up.

Verify the Ethernet Connection

Chances are that you have used a worn out or damaged Ethernet cable to connect your Netgear wireless router and the existing modem.

Therefore, either get the cable you are currently using replaced with a new one or consider connecting your devices with the help of a wireless source.

Bring Your Devices Closer

Another thing that you can do to get rid of the Netgear router IP not working issue is to bring your wireless router and the existing modem closer.

Unplug your Netgear Nighthawk router from the wall socket it is currently plugged into and plug it into the one located near the existing modem.

Use the Correct IP Address

Make sure that you type the correct IP address in the address bar of your internet browser. Also, keep the following points in mind while doing so:

  • Do not type the default IP address in the search bar of the browser.
  • Avoid typing errors.
  • Do cross-check the entered IP address before pressing the Enter key.

Now, try to access and check whether you are able to troubleshoot the Netgear router IP not working issue. If not, continue reading.

Update Your Internet Browser

If you haven’t updated your internet browser, do it now. In order to update your browser, you need to head over to the Settings menu, and click the Upgrade button.

Apart from that, your internet browser ought to be cleared of cache, cookies, and browsing history. Doing so will prevent you from facing other technical issues.

Reset Your Netgear Router

Did none of the aforementioned troubleshooting tips help you resolve the Netgear router IP not working issue? Well, in that case, consider performing factory default reset. Doing do will restore all the settings of your device to the factory default mode. Follow the instructions mentioned below and learn how to reset your device:

  • Locate the Reset button on your home router.
  • Once found, take any sharp object placed nearby and press the Reset button.
  • Hole on for a couple of seconds.

In some time, your Netgear wireless router will get restored signaling you to set it up from scratch via

Summing Up

With that, you will be able to troubleshoot the Netgear router IP not working issue. If the aforementioned tips helped you get rid of the issue you were facing with your device, do leave a word of appreciation in the comment section.

Leave a Reply

Back To Top