Are you struggling with the Linksys Velop keeps dropping connection issue? Well, that isn’t such good news. But, worry not. We can help you fix it. A little coordination is needed from your side too. All you need to do is, walk through the troubleshooting hacks given here. By the time you’ve reached the end of this post, you would have surely bid adieu to the Linksys Velop keeps dropping connection issue.
Fixed: Linksys Velop Keeps Dropping Connection
- Reboot Your Linksys Velop
Technical glitches are one of the biggest reasons why you are facing the Linksys Velop keeps dropping connection issue. To get rid of these glitches, you need to reboot your device. Take the help of the troubleshooting hacks mentioned below and learn how to go about the process:
- Turn off your Linksys Velop device and unplug it from its power source.
- Wait for a couple of seconds.
- Thereafter, plug your Linksys Velop device back into the wall socket and turn it on.
Once you are done rebooting your device, try to perform Linksys Velop login. Are you able to? No? Looks like you are still going bonkers because of the same issue. In that case, follow the next troubleshooting hack.
- Avoid WiFi Interference
WiFi interference is another reason that might have led your Linksys Velop router to drop connection. Thus, you need to avoid signal interference as much as you can. To keep WiFi interference at bay, keep your device away from the following devices, appliances, and surfaces:
- Cordless phones
- Washing machines
- Baby monitors
- Microwave ovens
- Bluetooth speakers
- Fish tanks
Apart from that, do not keep your Linksys Velop device in corners and near concrete walls.
- Update the Firmware
Every Linksys device comes embedded with software called firmware. Firmware controls the overall functionality of your device. If not updated timely, the performance of your device won’t take seconds before getting degraded.
Therefore, access the Linksys router login page and update the firmware of your device to the latest version. If you are not sure about the process, refer to the guidelines given here:
- Download the firmware file on your PC.
- Log in to your Linksys Velop device using the login credentials.
- Under the Router Settings option, click Connectivity.
- The Basic tab will appear.
- Click Choose File.
- Select the firmware file that you downloaded earlier.
- Hit Start.
- Click ‘Yes’ and wait for some time so that the update can finish.
Note: Do not turn off your system while the firmware of your Linksys Velop device is in the process of getting updated.
- Check the Power Supply
Chances are that your Linksys Velop device is not receiving an adequate power supply from its wall outlet. That can be because of two reasons: the wall socket you are currently using is damaged or the power cord connecting your router to the socket is worn out.
To troubleshoot the issue, it is recommended that you either get your wall socket fixed or plug your Linksys Velop device into another one.
- Perform Factory Default Reset
Did none of the aforementioned troubleshooting hacks help you get rid of the Linksys Velop keeps dropping connection issue? Well, then your last resort is to perform factory default reset.
Caution: Resetting your Linksys device will take its back to its default factory mode. In simple words, every change that you made to your wireless router till date will go poof. So, try this ultimate hack only if you are ready to take the risk.
Take the help of the steps mentioned below in order to reset your Linksys device:
- Locate the Reset button on your Linksys Velop device.
- Get hold of an oil pin and use it to press the Reset button.
- Wait for some time.
Once you are done resetting your Linksys Velop device, consider reconfiguring it.
Our guide to troubleshoot the Linksys Velop keeps dropping connection issue has come to an end here. We hope that after following the troubleshooting hacks mentioned above, you will be able to get rid of the issue you were facing.
Note: If you are also facing the Linksys extender keeps dropping connection issue and are not able to access extender.linksys.com, then the same hacks will apply.