There are a few essential toilet replacement parts that you need to know about. These include the water supply shut-off valve, the fill valve, the toilet chain, and the float. This information will help you determine which parts of your toilet need replacement. If you suspect your toilet needs replacement, the first thing to do is visit your local plumbing supply store. Most plumbing supply stores like Plumb2u have a wide variety of parts.
Water supply shut-off valve
The new shut-off valve can be installed in several ways. First, you must unplug the supply line from the toilet. You can remove the valve from its mounting bracket or unscrew the lock nut underneath the tank. Next, remove the old fill valve by unscrewing the lock nut on its base. Replace it with a new one. Remember to attach a shank washer to the threads of the new valve.
When replacing your shut-off valve, take note of the material. Some are made of plastic, and some will break if turned too tightly. If your valve is made of cast iron, you can recycle it. If you don’t want to reuse it, you can also use the braided water supply line, and it is more economical than buying a new valve. Once you replace your water supply shut-off valve, you can reuse the old one. If you need to replace a water supply shut-off valve, you can call your local plumber.
Toilet fill valve
The fill valve is a component of your toilet that regulates the amount of water released into the tank. Most toilets have a fill and flush valve, and modern low-flow toilets typically have a three or four-inch flush valve. While fill valves are almost universal, they come in a few different types. One type is called a float ball, and it’s attached to a plastic balloon.
There are three different types of fill valves. The most common one is the float cup type, which uses a float cup to sense water level. Float cups are very easy to fix. Remove the cover cap and access the inner seal. Once you’ve removed the cover cap, you can easily replace the inner seal. The float ball type is ideal for older toilet models.
Toilet chain
If your toilet chain is beginning to wear, it might be time to replace it. There are many replacement parts available, and these can make replacing your chain a simple task. However, you need to choose the right one, since some parts can become damaged by water or other substances.
A toilet chain is a part of a toilet lever that controls the flapper and sends water into the bowl. When you open the flapper, it lifts and closes the toilet lever, controlled by a chain. If a chain breaks, you can easily replace it by simply hammering it back into place with a wire. Toilet chains can also be repaired using a toilet flapper repair kit.
Toilet float
When the water level in your toilet tank is low, your toilet may be having a problem with the float cup. If this occurs, the refill tube may be faulty. When this occurs, the toilet flushes, sending water from the tank into the bowl. You can also try lubricant on the hinge connecting the float to the valve. However, this is not a permanent fix. Your toilet will need a new float ball.
While most toilets have a small ball that lowers when the water level is low, some older toilets use a float cup. This part is smaller than the ball and closes the fill valve to prevent water from spilling into the bowl. It helps keep the toilet tank more compact and doesn’t use as much water as older toilets. But when you need to replace the float ball, make sure you read the instructions carefully.
Floor flange
If your toilet flange is broken, you may need to replace it. Some plumbers recommend using the inside mount flange, which is easier to install, especially with a concrete or tile floor. Some plumbers, however, suggest that you use the outside mount flange for your toilet because it’s better suited for tiled floors. To make the process even easier, you can purchase a flange extender designed to fit inside the original soil pipe and provide a new flange.
Before attempting to replace your toilet flange, you’ll need to check the toilet’s water supply valve. If the water supply valve is broken, sewer gas will seep out easily. After checking your flange, you should test the water supply by flushing the toilet.