Customizing your car is a great way to show off your uniqueness and make your vehicle look its absolute best. If you want to alter its exterior, redoing the paint job is one of the biggest impact moves you can make, and it may be easier than you assume, too. In fact, applying a clear coat spray paint is a task that can be DIY-ed at home. If you decide to go this route, you could benefit from a friend’s helping hands, but don’t be surprised if your buddies are too busy to assist you with your paint project. In this case, doing it alone will be a challenge, but it’s one that you can overcome with a little creativity. Check out the following steps to spray painting your car by yourself.
Start With Priming Your Car
Any time you paint, you need to prime. This is especially true when you’re working with a glossy surface like a car’s exterior. Failure to prime your car could prevent your new paint from properly adhering to the surface, but an adhesion promoter is a great option for ensuring that your new paint has a clean surface to cling to. This primer works by creating a tactile surface on polyolefin materials such as the vinyl trim and plastic found on cars. Once the adhesive promoter has dried, the following coat of paint will adhere more effectively.
Priming is also important because it seals the original material, thus preventing the following paint layers from seeping into it and causing damage. This is particularly beneficial for cars if you want to keep some part of its original paint intact. A primer makes it easier to fix any mistakes because the underlying paint is effectively sealed. It’s also ideal for preventing peeling, bubbling, and flaking — all of which can happen soon after application if the paint has not properly adhered to your car.
Must Need Accessories for Spray Paint
Sometimes primer just isn’t enough—and sometimes it’s not the right product for the job. If you’re looking for a way to remove your car’s paint before applying a new coat, there are a few options that can help you do so. An aircraft paint remover is one of the best due to the strong chemical composition that removes nearly any finish from nearly any surface. It can be used on any lacquer, acrylic, or polyurethane surface — but despite all of this strength, it’s a non-corrosive substance.
There are other accessories that you should invest in, too, that will make your DIY endeavor easier. Also, prefer the quality paint spraying equipment that is best for the car paint. If you’re still planning on completing your paint job on your own, you should invest in a high-quality spray paint gun that will ensure your paint is evenly applied across your whole car. Similarly, you should look for a clear top coat that will safely seal your work after you’ve finished painting it. With these accessories and supplies, you’ll be able to achieve the paint job of your dreams all by yourself.